Downriggers
Accessories
Cannon Flash Weight
|
Universal Line Release
It's like having a spy in the murky depths.
Now any downrigger can do more than just hold a weight at the end
of a cable.
The new Speed-N-TempT Monitor from Cannon® has its own monitor for use with any
downrigger on the market. Simply attach this informative accessory to any manual
or electric downrigger and unlock the mysterious secrets of dark and deep trolling
waters. The sealed underwater transmitter attaches to the cable of any downrigger
just above the weight. The sensors on the Speed-N-Temp Monitor register the absolute
depth of the lure and the lure¹s true speed as well as light intensity and water
temperature at the lure's trolling location. These readings are then electronically
transmitted up through the downrigger cable and digitally displayed on the Speed-N-Temp
Monitor. Absolute depth of lure eliminates blow-back estimations and calculations
that anglers normally must decipher. While the boat may be traveling at 2.5 mph,
the lure may travel at different speeds depending on underwater currents.
With the Speed-N-Temp Monitor, true lure speed in tenths of mph can be adjusted
by the angler providing optimum strike stimulation. A chartreuse and blue lure
looks great in the sunlight but at a depth of 80 feet with filtered light the
lure may look invisible to the fish. Speed-N-Temp Monitor measures light intensity
and the appropriate lure color can be selected for the conditions at the trolling
depth. Water temperature at the lure¹s depth is provided, crucial for tracking
temperature sensitive fish. Using a standard cable, the Speed-N-Temp Monitor
operates up to a maximum depth of 100 feet. A coated cable increases operation
depth up to 300 feet. Speed-N-Temp activates when the speed wheel enters the
water and automatically shuts off after 15 minutes of inactivity. A replaceable
9-volt battery powers the transmitter for up to 200 hours of operation. Battery
voltage is also digitally displayed on monitor screen.
The use of Cannon¹s Speed-N-Temp Monitor will not interfere with downrigger features
such as Short Stop, Positive Ion Control and Stacker Releases. The 7.2 square
inch screen, with 2,300 pixels per square inch, provides an easy-to-read display
of the transmitted information. Overall, the saltwater protected monitor measures
5 inches by 5.3 inches by 2.5 inches and can be easily mounted at any location
on the boat. For the look of factory rigging, use the optional installation bracket
and mount the monitor in the dash of the console.
|
Speed-N-Temp Sensor
The Speed-N-Temp Sensor operates as part of
the Bottom Line NCC and Cannon Mag 20 DT System. The Speed-N-TempT Sensor
senses the speed and depth of your lure and the water temperature
and light level at your lure and displays the information using large,
easy-to-read numbers on the screen of the Tournament NCC 6300. Sensors
measure the information once a second to making it easy to find best
place put your lure. The Speed-N-Temp Sensor uses the downrigger
cable to transmit the data up to the NCC 6300, so no extra or monitors
are needed. And, the Speed-N-Temp Sensor can operate for up to 200
hours from one 9-volt battery.
|
|
|
UT/Marlin Base Mounting System
100% Heavy-duty
Lexan®. Strong and durable. Fits Uni-Troll.
|
Low Profile Swivel
Mounting Base
Heavy-duty Lexan® and stainless steel swivel base. 1 1/8" tall. Six-point locking including two 45-degree positions. Measures 5" x 5" x 1 1/8". For all Cannon downriggers.
|
Big Body Mounting Base
100% Heavy-duty Lexan®.
Strong and durable. Fits Magnum 10, Mag 20 DT, and DT IV.
|
Pedestal Base Mounting System
Pedestals position
downriggers just right. Easy to install on bass boats. Lets you raise
downriggers to knee level for easier operatioin. Ideal when boat rails
restrict normal mounting.
|
Deckplate
Solid aluminum deck
plate is drilled and tapped to fit only Cannon swivel bases, standard
bases and pedestals. Measures 6" x 5" x 1/2". Screws not included.
|
Gimbal Mounts
Simply slide the mount's gimbal
tube into your boat's recessed holder. Once in place, you have a base ready to
accept your downrigger. No holes to drill or changes to make on your boat. Removes
easily by pulling up and out of rod holder.
|
Rail Side Mount
Lets you secure your
downrigger to the rail of your boat. No cutting or drilling necessary.
Just clamp this aluminum mount to the rail and position your downrigger
on the base. It can also be used to mount a downrigger to the side
of your boat when gunwales won't accommodate deck plates or bases.
Should be attached at the "T" joint of the rail.
|
Clamp Mount
Lets you mount your
Cannon Sport-Troll, Easi-Troll or Mini-Mag downrigger on the gunwale
or transom of your boat. Aluminum mount has a comfortable hand knob
with heavy-duty coarse-thread screw that opens 2". This adds portability
to your downriggers.
|
Mounting Plate
For quick and easy removal and replacement of
your pedestals, install a mounting plate for each, then attach the
pedestal, with four locking knobs. Great for mounting pedestal-based
downriggers on bass boats. Includes four locking knobs.
|
Universal Line Release
It's truly a "universal" release because it
can cover so many different tension settings. It has two adjustment
points to allow tension settings from 2 to 22 lb. Perfect for slow
trolling with live baits or going after light-hitting walleyes. Tough
enough to handle heavy saltwater plugs.
|
Pinch-R-Release
Spring-action clip opens quickly and easily with finger pressure. 2- to 12-lb. tension range. The deeper the line is set back in the pads, the greater the pressure.
|
E-Z Release
|
Quick Release
|
Offshore Release
|
Dual Plane-R-Board
Plane-R-Boards's new design and construction
make it one of the best tracking boards on the market. Great for
rough water. Bright orange color for high visibility. Permanently
buoyant - will not dive. Lets you run multiple line sets and vary
the distance and the depth. High-impact material won't mar or damage
boats. Collapsible for easy storage. Packaged completely assembled-it's
ready to fish.
|
Plane-R-Reel EliteT
The only planer reel with a built-in clutch.
Plane-R-Reel Elite's exclusive clutch action provides a smooth, uniform release
of the boards for deployment. The handle gulps line quickly for fast board retrieval.
Comes with 150 feet of flourescent towline.
|
Dual Plane-R-Boom
Includes a 4-foot boom, base plate and four
mounting knobs, and two reels with built-in brake, each with 150
feet of flourescent towline.
|
Rover Board
Finally, an in-line planer board made from real wood. Because it's wood, it can pull more weight and still stack true.
Compact right- or left-hand unit includes two all-new, heavy-duty line releases that are perfect for the new super lines. These releases are larger and easier to handle, especially when your hands are cold and wet.
High-visibility flag makes the Rover easy for you to locate, and others to avoid.
|
150' Dacron Line
|
Universal Plane-R Release
Unique built-in clutch for smooth, fast retrieval of teaser lures.
|
Universal Plane-R Release Kite Reel
Kite Reel - Designed to mount overhead on boat's bridge.
|
Dual Rod Holder - Front Mount
Front-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked.
|
Dual Rod Holder - Rear Mount
Designed for fishing two rods off the same downrigger.
The post fits into the standard tube clamp that comes with most Cannon
downriggers. The angle of each holder can be adjusted separately.
All parts are made of lightweight, corrosion-resistant materials.
|
Multi-Mount Rod Holder/Deck Mount
Multi-Mount Rod Holder/Deck Mount
Rugged Lexan® and stainless steel rod holder features a deck-mount base. Rod
holder swings 180 degrees. Base swivels 360 degrees. With deck-mount plate.
|
Rod Holder
The Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.
|
Downrigger Cover
Gives added protection to your prized downrigger.
Velcro® fasteners. Covers any Cannon downrigger with single or double
rod holder. Black with white Cannon logo.
|
MAG 20DT Relay Cable
|
Digi-troll IV Relay Cable
|
Digi-Troll Transducer
|
| |
|
|
