 
|
CMD-4MR-RLY CO detector
The CMD-4MR-RLY is the most advanced CO detector available from Fireboy-Xintex.
It features automatic generator shutdown capability. When dangerous CO levels
are detected, the CMD-4MR-RLY shuts down the generator, a common source of CO.
This detector also features multiple location warning, allowing up to six detectors
to be linked in series. When one detector alarms, all connected detectors will
alarm to alert boat inhabitants in other locations to the presence of CO. Features
a state-of-the-art sensor that is unaffected by common cleaning solvents. 12
VDC operation. Low current draw. UL 2034 Listed for Marine use.
|
CMD-4MR carbon monoxide detector
The CMD-4MR carbon monoxide detector is available when generator shutdown and
multiple location warning are not desired. 12 VDC operation. Features a state-of-the-art
sensor that is unaffected by common cleaning solvents. Lowest current draw of
any Fireboy-Xintex CO Detector. UL 2034 Listed for Marine use.
|
CMD-1MR-9V 9V battery powered
carbon monoxide detector
The newest model in the Fireboy-Xintex Carbon Monoxide Detector family. The CMD-1MR-9V
is a 9V battery powered carbon monoxide detector, ideal for boats requiring additional
CO alarm protection and for boats without a CO alarm. The CMD-1MR-9V uses an
advanced biomimetic sensor to determine CO levels. Time Weighted Average sensor
technology is used to eliminate false alarms. Extremely low battery consumption – only
.016 mA. Install one unit in every sleeping area, galley, and confined space
for adequate protection. Ceiling or wall mount. Dimensions: 4.75” Diameter
x 1.5” Depth. 1-year limited warranty.
|
SS-770 Smoke & Fire Alarm
Smoke & Fire Alarm General purpose smoke and fire alarm for boats and RV's Meets
the requirement of NFPA 302 stating that "All vessels 26 feet or more in length
with accomodation spaces intended for sleeping shall be equipped with a single
station smoke alarm that is listed to UL217 for recreational vehicles..." Complies
with U.S. Coast Guard Section 28.325(b) and Section 181.450 inclusive Uses the
ionization principle of detection for detecting fast-flaming fires which consume
combustible materials rapidly and spread quickly 9v battery operated (battery
included); no wiring required for easy installation Low battery alarm features
audible beeps to indicate a battery replacement is required Incorporates an internationally
recognized horn signal for evacuation. During the alarm mode, the horn produces
three short beeps followed by a two second pause and then repeats. Features a
test button that is easily accessible on the cover of the alarm Recommended installation
is to intall one unit in each sleeping accomodation, salon, galley, engine/generator
room, and electrical control room
|
Xintex M-B2 Fume Detector
Features
of above M-2A, plus an automatic bilge blower control. The MB-2
adds automatic bilge blower control. The blower is automatically
started when a fume level of 16 to 20% LEL (lower explosive limit)
is reached and remains on until fume level is safely lowered. |
Xintex M-2A Fume Detector
A
microprocessor-controlled, two-channel gasoline fume detector
in a low profile, water resistant design. Its features include
two-channel monitoring capability, plug-in sensors (second sensor
optional), fault light alarm, fault lights to indicate a malfunction
in either the module or one of the sensors. A "press to test" button
for each channel indicates either an OK or Danger condition.
An Alarm Silence button deactivates the alarm horn. The system
is calibrated to eliminate most nuisance alarms while allowing
enough time to take action.
|
Xintex M-B1 Fume Detector
Features
of above M-1, plus 10 amp relay to automatically start bilge blower
fan. The MB-1 adds a 10 amp relay to automatically start the bilge
blower fan should gasoline fumes be detected. Installation requires
only the addition of two wire leads from the control to the blower
switch. To test, simply touch the test pad on the control: the red
alert lamp will glow, the alarm horn will sound and the blower motor
will start. |
Xintex M-1 Fume Detector
An ideal single channel
gasoline fume detector, the M-1 features high-tech styling, compact
size, circuitry Test and alarm horn Mute functions. The power on
indicator lamp automatically increases in brightness during daylight
and softens at night. The M-1 package includes a standard two-inch
display unit with gasoline sensor and twenty feet of plug-together
lead. In addition to gas fumes, the M-1 can also detect high concentrations
of battery hydrogen or engine exhaust.
|
S-1 Propane Fume Detector
A simple plug-in propane fume detector with Var-A-Brite indicator lamp that brightens
during the day and soften at night. Includes a test-button, alarm silence and
two (2) inch display housing. NOTE: Solenoid valve control not available with
S-1.
|
C-1 Propane Solenoid valve control
The C-1 is a simple solenoid valve control that features an "ON/OFF" and LED
that illuminates when the solenoid valve is open. Includes one SV-1 1/4" solenoid
valve.
The solenoid valve is normally closed and must have power applied to open it.
Mount the solenoid valve on the tank side of the regulator for LPG installations.
12 VDC operation.
Display size is 4.75" x 3.75" x 7/8".
|
S-2A Propane / CNG Monitor and
Control
A microprocessor-controlled two-channel monitor with automatic solenoid valve
on / off switch. Its features include low current draw, plug-in sensors (second
sensor optional), display module fault light / alarm and fault light / alarm
to indicate a malfunction in either one of the sensors. (Fault indicators show
that the module or sensors are not working and may need repair.) A "press to
test" button for each channel confirms function. 1 MS-2 sensor and 1 SV-1 solenoid
valve included. The system is calibrated at 20% LEL (lower explosive limit) to
eliminate most nuisance alarms while allowing enough time to take action. Module
size: 4 3/4" x 3 3/4" x 7/8"
|
S-1A Propane & CNG Fume Detector with Solenoid Valve
This is a simple, single channel propane fume detector that features a plug-in
sensor and a Var-A-Brite indicator lamp that brightens during the day and soften
at night.
The standard two-inch display module features a circuitry test and alarm horn
silence function.
Complete unit includes display module, one propane sensor and 20 feet of connector
wire. On / off switch opens and closes solenoid with the touch of a button.
|
Xintex MS-2 Gas Sensor
Quick
disconnect sensor with 12" lead and 20' sensor cable. Replaces
MS-1 and PS-1 sensors. Color-coded RED with a quick-disconnect
12-inch lead that connects to a standard 20-foot sensor cable
for use with M-1, MB-1, M-2A, S-1, S-1A and S-2A fume detectors.
Plug-in connectors eliminate wire routing during installation
or sensor replacement.
|
SV-1 Solenoid Valve
A UL listed 12V solenoid with FAIL-SAFE feature. Can be installed on either side
of a regulator, depending on whether the fuel source is propane or CNG. Consult
owner' manual. Compatible with all S-2A and S-1A modules.
Remote Alarm
|
| |
|
|
| |
|
|
| |
|
|
